Aerial Specialists Inc. USA - AWPT-Inspection Form

Go Back

Small "NON-DRIVEABLE" Slab Scissors Lift Check List

Manufacturer:	Model:			Serial Number:

Condition of Unit:
<-Excellent		<-Good	<-- Fair	<--Poor

Recommended Maintenance Inspection Schedule -->					Daily	Weekly	Monthly	Quarterly	BI - Annual	Annual

Wash Machine							XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Factory "Add-Ons" incl: "Self-Loader Options" for Proper Operation and Wear or Binding					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXX

Check Hydraulic Fluid Level an ADD (as recommended in Factory Manual)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Grease ALL Zerks					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Lubricate ALL Scissors Points					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Hyd Pressure (Not to EXCEED Mfg Recommendation in Manual)							XXXXX	XXXXX	XXXXX	XXXXX

Change Hydraulic Filter - (Return)							XXXXX	XXXXX	XXXXX	XXXXX

Change Hydraulic Filter - (In-Line Pressure)								XXXXX		XXXXX

Change Hydraulic Filter(s) - (In-Tank)								XXXXX		XXXXX

Check Hyd Pump Motor Assy for Fitting Leaks & Noises					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Proper Operation Speeds - (as Recommended in Manual)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check EMERGENCY Lowering Valve Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for proper Control Valve Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for Structural Damage & Broken Welds					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Scissors Arm Cross-Shafts for warp or binding					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Scissors Arm Bushings for Wear and Proper Location					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check LIFT CYL PIN(s) for Wear and/or Broken Roll Pins					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for LOOSE and/or Missing Set Screw Collars					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Guard Rail Hold-Downs					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for Bent Guard Rails					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Guard Rail Chains and/or Entry Slide Bar					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Hoses and Wire Harnesses for Cuts and Abrasions					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Machine COMPLETE for leaks					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Wiring Connections for Tightness							XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Upper Control & Lwr Control Switches for Proper Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check "Cord Storage" Operation - (if applicable)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Platform for ORIGINAL Factory Operations Handbook					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check FRONT END for proper Toe-In and Bushing Wear					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check CASTERS (If equipped) for damage and/or loose running gear					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check ALL Casters, Tires & Rims for Damage					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Wheel Bearings for Lubrication and True Running						XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check STEER Cylinder for Leaks & Proper Mounting					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check Lug Nuts for Proper Torque - (as Recommended in Factory Manual)					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Check for Outrigger Operation and Lubricate as Required					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Ensure that ALL Safety & Warning Deals & Placards are on unit					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Run unit thru Several FULL CYCLES for Proper Operation					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Give THOROUGH - "VISUAL INSPECTION!"					XXXXX	XXXXX	XXXXX	XXXXX	XXXXX	XXXXX

Go Back